What are WiFi dead spots? So this is kind of thing that some of the users might have faced while connected to the WiFi network in their buildings or house etc where they tend to see that the WiFi connection seems to be lost in some rooms spot of the building although the persons using it behind that room or far away gets up the fully functional connection signal. This condition might feel like very frustrating because there get up no idea how the issue of the lost signal could be solved out. If you are also facing up similar kind of WiFi dead spots in your house or any building then you should need not to worry about that as using up the method that we have written in this article you could gain WiFi signal even on that dead spots and hence remove up any kind of signal related issues. To know about the method just go and read the article!
Learn how to Eliminate WiFi Deadspots with These Simple Steps with some basic tips that you can easily implement on your local wifi network and get the best signal from your router to get high speed internet.
How to Eliminate WiFi Dead spots with These Simple Steps
The method is quite simple and easy and you just need to follow the simple guide to Eliminate WiFi Dead spots. So follow the below guide to proceed.
#1 Check Router Position
Sometimes when the router sits between any electronic device then it tends to behave in such a way that the signal gets restricted from some portion of the area and hence along that way the users tend to get up either distracted signal strength or o signal at all. If you are also facing any dead spot then try to check out the positioning of your WiFi router and place it away from any electronic device.
#2 Update Hardware and Firmware
Changing up the Router or any WiFi related hardware that have been too old could be the great thing that you could actually do to get up the best performance for the network connection. You should tend to update the router as well as any wireless adaptor, this could be done through checking up the manufacturers of the hardware and then asking their help.
#3 Use Wifi Extender
You can use up the WiFi extenders that are the devices that could provide you to spread up the WiFi connection signal to more area by acting as a middle-man. These devices receive up to the signal, boost up their strength and then pass it to the same direction. Now if you find up any dead spot in between the limit area of your WiFi connection you could remove or varnish it through using up the Extenders!
#4 USB Adapter
Use up the external WiFi adapters for your computer if you are using up the internal built-in WiFi adaptors till now. The USB adaptors could be the great value for getting up the increased performance and signal strength as this external hardware are much more capable of capturing even the lowest bandwidth signals.
#5 Alter Router Antenna
If the Router you are using up have an extended Antenna which can be moved in either direction then try to set up the direction of the antenna in such a way by which you get up most signal strength throughout. The best position for the antenna could be standing erect in the vertical position as this also does not block it from the electrical waves inside the router or other devices.
And these were the things that you can do to solve out your Wifi related signal issues in the deadspots and you could also eliminate these deadspots from your house or the building. Facing up the deadspots could be a very rare chance but still it is not impossible to have this problem or the issue and if you have also found up any deadspot then don’t just feel it to be the signal issue, just correct it by using up the method and ways described in the article!